July 19, 2018

Author: Kelvin

Cisco ISE :: Upgrading ISE from 2.x to 2.4

In this video demonstration, we take a look at the process involved for upgrading ISE nodes from versions 2.x to the current latest release of 2.4.  

KT Labs EP5 :: ACS to ISE Migration

In the video, I show you how you can leverage the ACS to ISE migration tool to migrate objects from ACS to ISE. As mentioned in the video, a few prerequisites need to be met, these are listed below. Prerequisites Direct connectivity to both the ACS and ISE platforms The correct version of ACS (see […]

Cisco ISE :: Adding Traditional Licenses

In this video, I demonstrate how to add traditional licenses to Cisco ISE. Note: This lab video uses Cisco ISE 2.3

Cisco :: Upgrade or Reimage Firepower 8300 Sensors?

Recently I was tasked with upgrading some new Firepower 3D8350 sensors which would later be stacked into a 3D8360. These devices were shipped with software version 5.4.0.1 and I had a customer requirement to upgrade the sensors to version 6.2. I would normally stack these devices and upgrade them using the FMC, however, I didn’t […]

KT Labs EP4 :: Automation using Ansible for Network Engineers

In this Vlog, I discuss how Ansible can be leveraged by engineers to automate configurations and save time. Ansible files for download: https://blog.synack.co.uk/download/kt-labs-ep4-ansible-files/ More about setting up Ansible: https://wp.me/p8lfsH-mn Ansible Documentation: http://docs.ansible.com/   Getting started with automation using ansible from Kelvin Charles    

Cisco :: Add Licenses to Cisco IOS Switches

In this video, I run through the configurations required to add and activate licenses on your Cisco IOS switch. A Cisco Catalyst 3750-x switch with IOS 15.x is used for this demonstration along with a SolarWinds TFTP server.  

KT Labs EP3 :: How to Upgrade the IOS on a Cisco Switch

In this video, I show you how to upgrade Cisco IOS switches. In this demonstration, a Cisco Catalyst 3750-x switch is used along with a Solarwinds TFTP server.    

Cisco :: 3750-x Switch Password Recovery

A quick video on how to password recover a Cisco 3750-x switch and similar models. Note: All device configurations will be lost.  

Cisco :: ASA to FTD Migration Tool

  In this article, I will demonstrate how to leverage the Firepower Management Center (FMC) to covert Adaptive Security Appliance (ASA) configurations to Firepower Threat Defence (FTD) configurations.  Using the ASA to FTD migration tool can save ample amounts of time, especially if you wish to carry over ASA ACLs and NAT rules. Before I get […]
Page 1 of 712345 » ...Last »

Subscribe to SYNACK via Email