June 21, 2018

Category: Configuration

FortiGate :: HA Routed Failover w/ Session Failover

A recent requirement that came up was for there to be a redundant pair of firewalls, which allowed for session failover, configuration synchronisation and also maintain different external IPs and seperate BGP peering. A niche request, but something that was supported with FortiGates. Below details some configuration examples to achieve this. Config and Session Sync […]

Cisco :: Upgrade or Reimage Firepower 8300 Sensors?

Recently I was tasked with upgrading some new Firepower 3D8350 sensors which would later be stacked into a 3D8360. These devices were shipped with software version 5.4.0.1 and I had a customer requirement to upgrade the sensors to version 6.2. I would normally stack these devices and upgrade them using the FMC, however, I didn’t […]

CCIE Security v5 :: ICMP Redirects

Today I wanted to share my CCIE Security notes on ICMP redirect messages. ICMP Redirection is used to notify hosts that a better route is available for packets destined for a specific destination. This feature is available and enabled by default on all Cisco IOS releases but it is worth mentioning that there may be […]

Cisco :: Configure ASAv To Use Virtual Serial Ports

In this article, I will demonstrate how to configure the ASAv so that you use a virtual serial port. This article assumes that you have installed the virtual Cisco Adaptive Security Appliance using VMware workstation or it’s equivalent and that you can only access the ASAv CLI via the VMware client. By default, the virtual serial […]

Cisco :: FXOS Authentication Using TACACS

In this article, I will describe how to enable authentication and authorization for Firepower eXtensible Operating System (FXOS) devices. The use case presented in this document illustrates how Cisco Identity Services Engine (ISE) can be utilised with attribute-value pairs (AV-Pairs) to authenticate and authorize users accessing the Firepower Chassis Manager (FCM) or FXOS platforms via […]

Cisco ASA :: Verifying ICMP Reachability on the ASA

If you’re a firewall engineer or work closely with the Cisco ASA then no doubt you will often find yourself troubleshooting and verifying reachability of packets on a network. One great feature that the ASA has to test reachability is the ‘packet-tracer’ command which when given an input will provide you with a very handy […]

Cisco ASA :: Object NAT

In this video demonstration, we take a look at Object NAT and how it can be used to map hosts statically.    

CCIE Security v5 :: TCP Interception

This article accompanies the demonstration video I have created below. TCP interception is a CCIE Security version 5 blueprint topic. What is TCP interception? TCP interception is a method used to protect against TCP SYN-flooding attacks. This is achieved by intercepting TCP connection requests (SYN packets) and verifying the connection before passing the original TCP SYN packet […]

Cisco :: Configuring Smart License Software

In this article, I would like to demonstrate how to configure Cisco Smart Licensing on the virtual Cisco Adaptive Security Appliance (ASAv). This post assumes that readers already have access to there own Smart Account and would like to know the process of applying licenses. Step 1: Generate ID Token Sign into your Cisco Software […]

CCIE Security v5 :: ASA Packet Processing Post 8.3 Code

In this article, I will share my notes on the ASA packet process for version 8.3+. Domain 1.0 off the CCIE Security version blueprint focuses on perimeter security and intrusion prevention, both of which include the ASA. In order to understand the ASA and how it works, it is important to understand how packets are processed […]
Page 1 of 212 »

Subscribe to SYNACK via Email